Soleus-air 3046364 User Manual

© 2008 Soleus Air International Portable Air Conditioner, Heat Pump Heater, Dehumidifier, Fan, & HEPA Air Purifier PA1-10R-32 Operating Instr

OPERATING INSTRUCTIONS CONTROL PANEL BUTTONS (Refer to the images on page 9) 1) Power On and Off - Press the POWER button once to manually turn the u

6) Select the desired fan speed by pressing the SPEED button. NOTE: During hot days, the unit will cool the room most efficiently by setting the temp

Auto Mode 1) Install the exhaust hoses and window kit properly (see pages 7 & 8). 2) Plug the Power Cord into an electrical outlet. 3) Turn on

13 AIR PURIFIER FUNCTION The PA1-10R-32 is equipped with a HEPA air purification mode. This mode is only available when the HEPA air filter has been

OPERATING THE UNIT USING THE REMOTE CONTROL 14 REMOTE CONTROL TIMER ON TIMER OFF LCD DISPLAY POWER BUTTON MINUTE SELECTER SLEEP BUTTON HOUR SELECTER

15 REMOTE CONTROL OPERATING INSTRUCTIONS 1) Power On and Off - Press the POWER (I/O) button on to turn the unit on or off When you press the POWER

Emergency Condensate Holding Tank When the room temperature is low and the indoor humidity is high, the air conditioner may not be able to evaporate

MAINTENANCE Note: Make sure power is off and the power cord is not plugged into an electrical outlet prior to performing any maintenance on the unit

WARRANTY One Year Limited Warranty Soleus International Inc. warrants the accompanying Soleus Air Portable Air Conditioner to be free of defects in

Thank you for choosing a Soleus Air Portable Air Conditioner. This owner’s manual will provide you with valuable information necessary for the proper

SPECIFICATIONS • The cooling capacity is measured at an ambient temperature of DB 86 °F, WB 78 °F. • Noise level is measured at a distance of 3.28 f

PRODUCT DIAGRAM (Actual product design may differ slightly from images below) 4 FRONT A. Control panel B. Air outlet C. Casters D. Power Cord &am

INSTALLATION 5 SELECTING THE LOCATION Place the unit in a flat location where the air out-lets are not obstructed. Place the unit at least 20” (50c

LCDI POWER CORD AND PLUG This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord and plug as required

WINDOW KIT INSTALLATION The window kit is designed to fit into most standard vertical and horizontal windows, as well as some sliding glass doors. H

WINDOW KIT INSTALLATION (cont’d) 8 NOTE: The Portable Air Conditioner above may differ from the unit described in this manual. The above directions a

CONTROL PANEL, DISPLAY, & OPERATING INSTRUCTIONS CONTROL PANEL & MULTI-COLOR DISPLAY TEMP AND TIMER IND