Soleus-air HGW-308 User Manual download pdf (Page 8)

Knob is at the " " position. [Fig 1]

Power Indicator

Light

Power Switch

Temperature

Control Dial

Heat Indicator

Light

OPERATING INSTRUCTIONS

PLEASE READ ALL INSTRUCTIONS BEFORE OPERATING HEATER!

Plug the power cord into a suitable electri-

cal outlet. The Green Power Icon will now

turn on.

[Rated not less than 115 volt].

Turn the power switch to the “I” position

for 1000W or “II” for 1500W.

Adjust the

Temperature Control Knob clockwise until the

Red Light Indicator turns on [Fig 2]. The Tem-

perature Control should begin.

Note: The Red Light Indicator will turn off

when the room reaches the desired tempera-

ture. After a while, as the room temperature

falls, the heater will turn on again and re-

lease heat until the room temperature rises

to the desired temperature. Desired room

temperature is maintained automatically by

this procedure.

You can adjust the temperature control

knob to increase or decrease the room tem-

perature as desired by turning the knob

clockwise or counter-clockwise direction as

shown in Fig 2.

Make sure the Temperature Control

Make sure the power switch is at off

position. [Fig 2]

1 2 3 4 5 6 7 8 9 10 11

No comments

Soleus-air HGW-308 User Manual Page 8