5
OPERATING INSTRUCTIONS
Set the fan on a stable, level surface. Plug the cord into a standard 120V A/C outlet.
POWERING ON THE FAN
The fan can be turned by pressing the POWER button on the fan control panel or using
the supplied remote control. The POWER button is also used to turn the fan off.
FAN SPEED
The default fan speed is low. To increase the fan speed to medium or high, press the
SPEED button on the fan control panel or the remote control. By pressing the SPEED
button, the fan will cycle through the 3 fan speeds until the desired speed is selected.
OSCILLATION
The fan can operate in oscillation or stationary mode. Press the OSCILLATE button on
the control panel to start oscillation, or press the OSC button on the supplied remote. To
turn Oscillation off, simply press the OSCILLATE button or OSC button once more.
WIND MODES
Press the MODE button on the fan control panel or remote to select one of the three
wind modes. When the fan is initially powered-on, the default wind mode (normal) is
selected. Press the MODE button once to select Natural wind mode, and twice to select
Rhythm wind mode. During Natural wind mode, the fan will simulate the airflow of the
wind by randomly alternate through its 3 fan speeds. During Rhythm wind mode the fan
cycles through the fan speeds in order of Low, Medium, and High.
IONIZER
This fan is equipped with a built-in ionizer to help clean the air around you. To operate
the ionizer, press the IONIZER button on the fan control panel or the supplied remote
control. To turn off the ionizer, simply press the IONIZER button again.
TIMER
The fan can be programmed to automatically shut-off after a set period of time. The
timer can be set for 30 minute increments. The maximum programmed time is 12 hours.
Once the timer reaches 0:00, the fan will automatically shut-off. To start the Timer,
press the TIMER button on the control panel or the supplied remote. Each press of the
TIMER button will increase the timer by 30 minutes. Press the TIMER button until the
desired time is visible on the multi-color display. To quickly set the timer, hold down the
TIMER button until the desired time is visible on the control panel.
CLOCK
When the fan is not operating, the timer will stay on in clock mode. Once the clock is
set, the display will show the current time when the fan is off. To set the clock, turn the
fan off and then press the SPEED button until the correct hour is visible on the display.
To set the minutes press the TIMER button until the correct minutes are visible on the
display. The fan will keep the correct time as long as it is plugged-in. If the fan is
unplugged, or there is a power-loss, the clock will reset to 0:00. To quickly set the clock,
simply hold down the SPEED and TIMER buttons (separately) on the control panel until
the current hour and minutes are shown on the display.
(8 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals