Soleus Air SG-WAC-12HCE User Manual download pdf (Page 9)

ASSEMBLY & INSTALLATION (CONT.)

7. Attach foam adhesive seal along the bottom of the cur-

tain bottom channel. FIG 9

Placing the Cabinet Inside the Window

1. Open the window and place the cabinet in the middle

of the window sill.

2. Make sure the bottom rail is seated over the window

sill as shown below. Bring the window down temporar-

ily behind the top angle rail to hold the cabinet in place.

3. Fasten cabinet to window sill (B) using three #10 x 1/2”

pan-head Phillips screws (A). Pre-drill holes if needed.

Top Angle Rail and Side Bracket Installation

1. Place the air conditioner on a hard flat surface.

2. Locate the foam gasket and top angle rail

3. Attach the foam gasket to the top angle.

4. Install top angle side to cabinet rail using the #10 3/8”

Pan Head Phillips screws as shown in FIG 7.

5. Insert top and then bottom of right-hand curtain into the

top and angle rails on the cabinet.

6. Extend right-hand curtain outward to insert the #10 x

1/4” pan-head Phillips screw, screw curtain into middle

hole of the cabinet. Repeat for left side. FIG 8

FIG. 7

Foam Gasket and Top

SILL

STOOL

ANGLE

FIG. 9 FIG. 8

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

No comments

Soleus Air SG-WAC-12HCE User Manual Page 9