Soleus Air PE7-10R-03 User Manual

© 2012Soleus Air International Portable Air Conditioner with Evaporative Technology PE7-10R-03 Operating Instructions Model No. PE7-10R-03 3046364

OPERATING THE UNIT USING THE CONTROL PANEL Air Conditioner Mode 1) Install the exhaust hose and window kit properly (see pages 7 & 8). 2) Plug

Emergency Condensate Holding Tank When the room temperature is low and the indoor humidity is high, the air conditioner may not be able to evaporate

REMOTE CONTROL TIMER/TEMP INCREASE FAN SPEED POWER BUTTON TIMER BUTTON TIMER/TEMP DECREASE SLEEP MODE (not available on this model) MODE BUTTON °F/°C

MAINTENANCE Note: Make sure power is off and the power cord is not plugged into an electrical outlet prior to performing any maintenance on the unit

WARRANTY One Year Limited Warranty Soleus International Inc. warrants the accompanying Soleus Air Portable Air Conditioner to be free of defects in

Thank you for choosing a Soleus Air Portable Air Conditioner. This owner’s manual will provide you with valuable information necessary for the proper

SPECIFICATIONS • The cooling capacity is measured at an ambient temperature of DB 86 °F, WB 78 °F. • Noise level is measured at a distance of 3.28 f

NOTE: Actual product design may differ slightly from images below. 4 FRONT A. Control panel B. Vertical air louvers C. Air outlet D. Horizontal a

5 SELECTING THE LOCATION Place the unit in a flat location where the air out-lets are not obstructed. Place the unit at least 20” (50cm) away from

This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord and plug as required by US National Electric Co

WINDOW KIT INSTALLATION The window kit is designed to fit into most standard vertical and horizontal windows, as well as some sliding glass doors. H

8 NOTE: The Portable Air Conditioner above may differ from the unit described in this manual. The above directions and images show general directions

9 CONTROL PANEL & OPERATION 1) Power On and Off - Press the POWER button once to manually turn the unit on. Press the POWER button once more to