Soleus Air HC7-15-01 User Manual download pdf (Page 5)

OPERATING INSTRUCTIONS

Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet.

Only operate the heater when it is in the upright position.

Use the instructions below to operate the heater using the control panel.

1. Turn the POWER SELECT dial (bottom dial) to the desired power setting (High/Low/

Fan). When this switch is turned to the desired setting, the red POWER INDICATION

LIGHT will light up indicating there is power to the unit.

2. This heater is able to run in LOW (750 Watts), High (1500 Watts), and Fan only mode.

Choose the desired mode based on your comfort level.

3. To activate the oscillation function, turn the OSCILLATION dial (top dial) to the swing

position. Once the arrow on the dial is pointing to SWING, the heater will oscillate back

and forth to spread heat throughout the room.

Polarized Plug

Warning: This appliance has a polarized plug (one blade is wider than the other). To reduce the

risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the

plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified

electrician. Do not attempt to modify the plug in any way.

DO NOT DEFEAT THE SAFETY PURPOSE OF THE POLARIZED PLUG.

Tip-Over Safety Switch

This heater equipped with tip-over safety switch located underneath the base of the heater. This

switch must be pressed inward for the heater to function properly. Some soft surfaces such as

carpet may not be able to fully press in this switch. For some soft surfaces, a hard flat object

will need to be placed underneath the heater for it to function properly.

PLEASE DO NOT TAPE OR GLUE THIS SWITCH.

SAFETY FEATURES

1 2 3 4 5 6 7

No comments

Soleus Air HC7-15-01 User Manual Page 5