- 10 -
- 14 -
Specifications are subject to change without prior notice. Visit our website - www.soleusair.comCopyright 2003 Soleus International Inc.PERFORMANCE RA
- 16 -
Outdoor unit installation location:lOutdoor unit location must be well ventilated. Avoid installing where any type of flammablegas could leak.lProper
Safety Precautions ... 1Identification of parts ...
Installation instructions3. Indoor unit refrigeration line installationlThe refrigeration lines and wiring can be routed to the outdoor unit in a numb
- 19 -
Suppport plateHookHookMounting the Indoor unit to the Mounting Plate:l Hook the indoor unit onto the upper portion of the mounting plate by connecting
Installation instructionsOutdoor unit installation1. Install the outdoor unitlOutdoor unit must be mounted on a solid, level foundation. If possible,
Installation instructions3. Wiring connectionlRemove the electrical cover of outdoor unit (1 screw).lConnect wires as shown below in the illustrations
Installation instructionsSystem Start Up and Charge Adjustment ProceduresThe outdoor unit is supplied with a R-22 charge sufficient for 15 feet of ref
HOW TO INSTALL DRAIN ACCESSORIESThere will be some water dripping from the condenser when the heat pump is working during the heating mode.Two drain c
- 25 -
- 26 -
Do not turn off the power supply cir-cuit breaker or pull out the unit powercord during unit operation. This maycause electrical hazards and/ or a fir
USE COPPER WIRES ONLY FOR POWER SUPPLY.WARNING:RISK OF ELECTRIC SHOCK CAN CAUSE INJURY OR DEATH.DISCONNECT ALL ELECTRIC POWER SUPPLIES BEFORE SERVICIN
- 29 -
TroubleshootingRUN light blinks Defect What to check1 time2 times3 times4 timesContinuousblinkAbnormality of room temperaturesensor.Abnormality of def
- 3 -
Comments to this Manuals